• 
• 
• 
• 
• 
• 

Accessories

Armrests / Seatbelts & Harnesses / Head Rests / Mounting Brackets / Pedestals & Turntables

Armrests

Armrest Kit - 300 Series	Standard armrest kit to fit the KAB 300 series seats. The armrests are able to tip-up independently.
Armrest Kit - 303	Armrest kit with rake adjustment to fit the KAB 303 high backed seats.
Armrest Kit - Heavy Duty 300 Series	Heavy duty armrest kit to kit the KAB 300 series seats.
Armrest Kit - LT/LX	The armrest kit for the LT and LX fits on both sides with broad supports. It attaches directly to the seat mounting and is particularly suitable for electric wheelchairs. Standard Features Left hand and right hand armrest on broad frame Direct attachment to seat mounting points Tip-up and rake angle adjustment Material is rubberised plastic
Armrest Kit - U Series	Armrest kit with tip-up and rake adjustment facility. Bolts and spacers are supplied to fit to KAB U series seats.
Deluxe Armrest Kit	Fits to most of the KAB seat uppers. The armrest can be tipped up out of the way and the angle at which it rests in the down position can be adjusted. The armrest pads are ergonomically shaped to improve comfort.
Ergo Armrest	A versatile armrest that pivots and adjusts in all axis. Adapter provides fixing to mount joytsick or switch controls to optimise ergonomics for the driver.
Armrests		click here for larger image

Back to the top

Seatbelts & Harnesses

Replacement Car Seat Belts	An extensive selection of replacement seat belts are available for most make and model vehicles. These kits are equivalent to the original in function but at a substantially lower cost. Replacement kits are available for front and rear seat positions. If you are interested in purchasing a kit, please email us with details of the vehicle make, model and rear of manufacture. Let us know which kit you require and we will contact you to confirm availability.
Retractable Seat Belt	Retractable seat belt kit specifically designed to fit the KAB T4 and T5 upper.
Retractable Seat Belt	A durable retractable seat belt with protective PVC sleeving. An ALR retractor type Robust.
Static Lap Belt	This is the most popular of our static belt kits. Other options are available for seat or floor fixing to approved anchorage points. Easy to install and quick to adjust. Specification 50mm black polyester webbing Approved to European standards Supplied with all necessary fittings
Static Lap Belt - P2/P3	Static lap belt to fit the KAB P2 or P3 pan seat. The kit is supplied with all the required fixings.
Seatbelts		click here for larger image

Back to the top

Head Rests

Head Rests		click here for larger image
Head Rests		click here for larger image

Back to the top

Mounting Brackets

Mounting Brackets		click here for larger image
Mounting Brackets		click here for larger image
Carbodies Metrocab - 414 Fitting Kit	Fitting kit for installation of the KAB 414 suspension seat into a Carbodies Metrocab.
Iseki TX Tractors - 1980's	This is a fitting brackets suitable for Iseki TX tractors. It utilises the original pin fixing arrangement to allow the seat assembly to tip forward. The following seat options can be used in conjunction with this bracket: Static Seats P1 static seat with or without slide rails P2 static seat with or without slide rails U1 static seat with or without slide rails Suspension Seats XH2/P2 suspension seat (seated position will be higher than the original but acceptible to certain individuals) Fitting Instructions Remove the existing seat by removing the spring clips and withdrawing th pivot pin. If you have purchased the slide rail kit with one of the static seat options, fasten them to the underside in the position where the rails will be 120mm apart. Assemble the new seat assembly onto the Iseki TX fitting bracket. Offer the assebly into position and insert the original pivot pin and clip.
Volvo FH12, FL12, FM12 and FH16	This fitting kit allows a selection of KAB products to be fitted in replacement to the original driver's seat. The following seat options can be used in conjunction with this kit: Air Suspension Seats 714 - various configurations and options are available with this product Mechanical Suspension Seats 414 - various configurations and options are available with this product Fitting Instructions Remove the original seat together with its mounting plinth. Assemble the brackets across the end holes of the slide rails with the lower flanges facing inwards. Assemble the seat to the original plinth. It may be necessary to slightly open out the holes in the lower flange of the brackets. Fasten the seat assembly back into the vehicle using the original bolts.

Back to the top

Pedestals & Turntables

Anodised Marine Pedestal	Luxury anodised pedestal with folding footrest. Ideal you arduous environments. Adapter plates are available to allow fitment of most seats.
Chrome Marine Pedestal	Luxury chrome pedestal with foldable teak footrest. Robust design. Adapter plates are available to allow fitment of most seats.
Deck Rail	A highly stable and solid rail with an attractive, modern design. Available either surface mounted or recessed in a number of standard lengths. The carriage is specifically machined to fit either of our marine pedestals. Features carriage lock from sitting position manufactured of anodised aluminium with rubber coated centre plate Easy to install Supplied with anti-trip skirting and dust covers The mounting surface must be even and offer a good hold for fixing screws. The deck rails are available in specific lengths is required.
Heavy Duty Turntable	Ideally suited for seats with 280mm slide rail spacing used in rugged environments. Can be adpated to stop at any position. Standard Features Captive nuts on the top face spaced at 280mm to mount seat Large captive nuts on the bottom to mount the turntable to the vehicle Full 360 degree rotation with stops at 180 degrees
Pedestal - Various Heights	A selection of pedestals are available for mounting seat units. Heights of 150, 228, 247 and 336mm are available. The top plate of the pedestal caters for mounting centres of 280 by 280mm. Additional holes can be drilled in the plate if required.
Pedestal with Turntable	Pedestal assembly including turntable mechanism which rotates through 180 degrees. Ideal for backhoe loaders. Particular suited to JCB vehicles. Seat Mounting Centres: 280mm left to right, 303mm front to back Foot Plate Mounting Centres: 160mm left to right, 210mm front to back
Turntable	This turntable is ideal for most aplications. Provides stops at +/- 20 degrees and 180 degrees.

Back to the top