Marine seats in Thomastown

Quality Marine Seats - Australia

The marine industry is very demanding and all marine seating products must be capable of enduring extreme temperatures (both hot and cold), plus salt air, corrosion, dirt, and grit. They must also be comfortable even when faced with rough water. You don’t want to waste any time or money on poor seating that regularly needs changing due to not being capable of standing up to all the conditions which seat, and you, must face on the sea.

Here at KAB Performance Seating, our marine seats are designed and manufactured to suit the suspension seating combinations that you need specifically to ensure long term usage and comfort. We use state of the art mechanical suspension and adjustment technologies that can be used on any vessel in different sizes, with critical protection and support for all kinds of marine operators.

Call us for a free quote on all your construction seat needs on (03) 9469 4082.

Mechanical

514C

Mechanical suspension seating for the construction and marine sectors.

 

Features

  • 2 spring mechanical suspension
  • 100mm (4") vertical suspension stroke
  • 60mm height and tilt adjustment
  • Driver weight adjustment 50 - 120kg (110 - 265lb)
  • Suspension cover
  • Air lumbar
  • Fore and aft adjustment of 180mm (7")
  • Backrest angle adjustment
  • Double locking heavy duty slide rails
  • Vibration performance to ISO 7096
  • Integrated full harness seat belt (4 point)

Options

  • Adjustable armrests (50/70/80/100mm widths)
  • Adjustable headrest
  • Cushion heaters
  • Adjustable damper
  • Double dampers
  • Seat sensor switch
  • Front or side controls available
  • Range of fabrics and PVC

TECHNICAL INFORMATION

 

  • SIP to ISO 5353
  • Dimensions at mid suspension stroke, middle height adjustment and at mid rail adjustment
  • Indicative dimensions

ADDITIONAL INFORMATION
This model is just part of the extensive 500 series range. Other high back, low back and narrower seats are also available.

61/K4

The 61/K4 is a high back mechanical suspension seat from the New 600 series range.

 

  • Wide platform for improved stability and reduced free play in heavy duty applications

Features

  • Low natural frequency mechanical suspension
  • 160mm vertical suspension stroke
  • Manual adjustment for driver weight,with extended weight range for operators of 50 - 175kg
  • 60mm integral seat height adjustment
  • Backrest angle adjustment
  • Fore and aft adjustment - 160mm
  • Suspension cover
  • 5 position lumbar support
  • 50mm seat cushion length adjustment
  • 7 and a half degree seat tilt adjustment in 3 positions
  • Adjustable headrest
  • 50mm Fore and Aft Isolator

Options

  • Comfort armrests
  • Cushion heaters - 12v or 24v
  • Seat belt to ISO 6683 & SAE J386 (15kN)
  • Meets 22.kN seat belt requirements without tethers
    Range of high quality fabric or PVC
    Achieves ISO 7096 seat performance for construction vehicles in categories EM1, EM3,EM4,EM5,EM6 and EM8
  • Constant Seat Index Point (SIP) through the use of a Positioning System Module (PSM)

515/525

Features

  • 100mm vertical suspension stroke
  • Manual adjustment for driver, weight from 50 - 120kg. 525 has a weight range of 50 - 150kg.
  • 60mm seat height and tilt adjustment
  • Backrest angle adjustment
  • Fore and aft adjustment - 200mm
  • Suspension cover
  • Vibration performance ISO 7096

Options

  • 5 position lumbar support
  • Adjustable pivoting armrests
  • Cushion heaters - 12v or 24v
  • Seat belt to ISO 6683 & SAE J386 (15kN)
  • Adjustable headrest
  • Tether belt version to meet (22kN)
  • Range of high quality fabric or PVC trims

11/U5

Features

  • 80mm vertical suspension stroke
  • 70mm integral height adjustment
  • Adjustment for driver weight 50 - 120kg
  • Ride indicator
  • Suspension cover
  • Vibration performance to EEC 78/764 & ISO 7096
  • 15kN seat belt anchorage strength to ISO 6683, SAE J386 & ISO 3776
  • Stylish seat upper in PVC or fabric
  • Cushion drainage
  • Fore and aft adjustment

Options

  • Adjustable/non adjustable pivoting armrests
  • Backrest extension
  • Seat belt
  • Turntable
  • Cushion heaters 12v or 24v
  • Seat Sensor switch
  • Document pouch

525P

Air and mechanical suspension seating for the construction and marine sectors

Features

  • Mechanical suspension
  • 100mm vertical suspension stroke
  • Driver weight adjustment from 50 to 130 kg (175-330lb)
  • 60mm seat height and tilt adjustment
  • Backrest angle adjustment
  • Fore and aft adjustment of 160-200mm (relative to control pods)
  • Moulded control pods to carry hydraulic electronic control joysticks
  • Control pod height adjustment 50mm
  • Control pod armrest height adjustment 40mm (relative to joystick)
  • Suspension cover
  • Seat belt to ISO 6683, SAE J386 (anchorage strength 15Kn)
  • Front controls

Options

  • 5 position lumbar support
  • Adjustable headrest
  • Cushion heaters
  • Tether belt version to SAE J386, June 1985 (anchorage strength 22Kn)
  • Range of high quality fabric or PVC trim
  • Seat belt widths 50mm (2") & 75mm (3")
  • Adjustable damper
  • Double Dampers
  • Seat sensor switch
  • Turntable 0 degrees - 180 degrees

Note. The image shown is fitted with optional extras. Hydraulic joysticks not included

TECHNICAL INFORMATION

 

  • SIP to ISO5353
  • Dimensions at mid suspension stroke, middle height adjustment and at mid sliderail adjustment
  • Indicative dimensions
  • Air 525P shown

 

T1

Features

  • High quality static seat where a suspension seat may not be required
  • Backrest angle adjustment

Options

  • Seat height and tilt adjustment - 60mm or 100mm
  • Fore and aft adjustment - 160mm
  • Mechanical or pneumatic lumbar support
  • Cushion heaters - 12v or 24v
  • Adjustable headrest
  • Adjustable pivoting armrests
  • Seat belt
  • Range of high quality fabric and PVC trims
  • Fixed backrest
  • Document pouch

61/K1

The 61/K1 is a mid back mechanical suspension seat from the New 600 series range.

 

  • Wide platform for improved stability and reduced free play in heavy duty applications

Features

  • Low natural frequency mechanical suspension
  • 160mm vertical suspension stroke
  • Manual adjustment for driver weight,with extended weight range for operators of 50 - 175kg
  • 60mm integral seat height adjustment
  • Backrest angle adjustment
  • Fore and aft adjustment - 160mm
  • Suspension cover
  • 5 position lumbar support
  • 50mm seat cushion length adjustment
  • 7 and a half degree seat tilt adjustment in 3 positions
  • Adjustable headrest
  • 50mm Fore and Aft Isolator

Options

  • Comfort armrests
  • Cushion heaters - 12v or 24v
  • Seat belt to ISO 6683 & SAE J386 (15kN)
  • Meets 22.kN seat belt requirements without tethers
  • Range of high quality fabric or PVC
  • Achieves ISO 7096 seat performance for construction vehicles in categories EM1, EM3,EM4,EM5,EM6 and EM8
  • Constant Seat Index Point (SIP) through the use of a Positioning System Module (PSM)

XH2/P2

Features

  • 90mm vertical suspension stroke
  • Manual adjustment for driver, weight from 50 - 120kg
  • 70mm height adjustment
  • Integral one piece foam and PVC trim
  • Rigid steel pan
  • Ventilation and surface drainage grooves
  • Drainage holes in base
  • Vibration performance to EEC 78/764

Options

  • Fabric trim
  • Backrest extension
  • Seat belt
  • ISO 6683 (15kN) version