Mining seats in Thomastown

Mining Seats - Australia

We provide quality mining and construction seats for all brands, makes and models, including:

  • Caterpillar (CAT)
  • Komatsu
  • Kobelco
  • Hitachi

It’s a well-known fact that the mining industry has been associated with high incidences of back pains and injuries. This is usually due to using heavy mining equipment, demanding work which can affect posture, and exposure to whole body vibration. This is especially those who are subjected to constant hours spent seated on machinery. It is inevitable that if you are not correctly supported and comfortable, then you will experience injury and pain.

Here at KAB Performance Seating, we can that problem for you. Our range of mining seats can be used for many underground and open pit equipment work, which all meet the specific requirements needed to suit each type of machinery. Our mining seats have been specifically designed for challenging mining operations and to accommodate breathing apparatus, hence why we designed the cutaway back cushion.

Call us to discuss all your mining and contruction seat needs on (03) 9469 4082.

Mechanical

21/T1

Features

  • 50mm vertical suspension stroke
  • Driver weight adjustment (50-120kg)
  • Backrest angle adjustment
  • Mechanical lumbar support
  • Fore and aft adjustment - 160mm with 216mm lateral centres
  • Suspension cover

Options

  • Headrest with height and tilt adjustment
  • Adjustable armrests
  • Seat belt
  • Fabric and PVC trims
  • Other fore and aft adjustment lateral centres are available

The low profile 21/T Series suspension seats are ideal upgrades for applications with limited overhead room and restricted space between the seat and steering wheel normally fitted with static seating.

The 21 suspension module helps to increase driver safety and reduce stress by eliminating up to 70% of harmful vibrations.

Driver comfort is maximised on the 21/T1 model by the body contoured seat and back cushions.

525P

Air and mechanical suspension seating for the construction and marine sectors

 

Features

 

  • Mechanical suspension
  • 100mm vertical suspension stroke
  • Driver weight adjustment from 50 to 130 kg (175-330lb)
  • 60mm seat height and tilt adjustment
  • Backrest angle adjustment
  • Fore and aft adjustment of 160-200mm (relative to control pods)
  • Moulded control pods to carry hydraulic electronic control joysticks
  • Control pod height adjustment 50mm
  • Control pod armrest height adjustment 40mm (relative to joystick)
  • Suspension cover
  • Seat belt to ISO 6683, SAE J386 (anchorage strength 15Kn)
  • Front controls

Options

  • 5 position lumbar support
  • Adjustable headrest
  • Cushion heaters
  • Tether belt version to SAE J386, June 1985 (anchorage strength 22Kn)
  • Range of high quality fabric or PVC trim
  • Seat belt widths 50mm (2") & 75mm (3")
  • Adjustable damper
  • Double Dampers
  • Seat sensor switch
  • Turntable 0 degrees - 180 degrees

11/F1

This seat has been designed specifically for mining operations.
It has been designed to accommodate breathing apparatus, hence the cutaway back cushion.

 

Features

  • Mechanical suspension
  • Vertical suspension stroke 80mm (3 and 1/4")
  • Integral height adjustment 0-30 or 70mm
  • Driver weight adjustment 50-120 (110-265lb)
  • Ride indicator
  • Suspension cover
  • Fore and aft adjustment 150mm (6")
  • Fixed back
  • Heavy Duty PVC

For line drawings click on 'Leaflets'and go to page 1.

T1

Features

  • High quality static seat where a suspension seat may not be required
  • Backrest angle adjustment

Options

  • Seat height and tilt adjustment - 60mm or 100mm
  • Fore and aft adjustment - 160mm
  • Mechanical or pneumatic lumbar support
  • Cushion heaters - 12v or 24v
  • Adjustable headrest
  • Adjustable pivoting armrests
  • Seat belt
  • Range of high quality fabric and PVC trims
  • Fixed backrest
  • Document pouch

Air

Air 555

Features

  • 125mm vertical suspension stroke
  • 60mm seat height and tilt adjustment
  • Backrest angle adjustment
  • Fore and aft adjustment - 200mm
  • Suspension cover

Options

  • Integral air compressor - 12v or 24v
  • Self levelling valve for suspension
  • 5 position lumbar support
  • Adjustable pivoting armrests
  • Adjustable headrest
  • Cushion heaters - 12v or 24v
  • Seat belt to ISO 6683 & SAE J386 (15kN)
  • Tether belt version to meet (22kN)
  • Range of high quality fabric or PVC trims

The image shown is fitted with optional extras. The 555 series can be fitted with double dampers for heavy vibration applications.

Air 151

Compact air suspension ideally suited to Telehandlers and Rough terrain forklifts,and agricultural utility vehicles.
Mid-back T1 seat upper affords good back support.

 

Features

  • Backrest angle adjustment ( + 66 degrees / - 72 degrees)
  • Integral air compressor
  • 80mm vertical suspension stroke
  • 70mm integral height adjustment
  • Adjustment for driver weight 50-120kg
  • Ride indicator
  • Suspension cover
  • T1 upper
  • Vibration performance to EEC 78/764 & ISO 7096
  • 15kN seat belt anchorage strength to ISO 6683, SAE J386 & ISO 3776
  • 150mm fore and aftadjustment

Options

  • Adjustable/non adjustable pivoting armrests
  • Headrest(height & tilt adjustable)
  • Seat belt
  • Cushion heaters, 12v or 24v
  • Variable up-stop
  • Seat Sensor switch
  • Document pouch
  • Range of fabrics and PVC
  • Lumbar support

411

Mechanical suspension seating for the Truck and Construction sector

 

Features

 

  • Mechanical suspension
  • 100mm vertical suspension stroke(4")
  • Manual adjustment for driver, weight from 50 - 120kg (110-265lb)
  • 60mm seat height and tilt adjustment (2 1/2")
  • Backrest angle adjustment
  • Fore and aft adjustment - 160mm (6 and 1/4 ")
  • Suspension cover

Options

  • 75mm vertical suspension stroke
  • 5 position lumbar support
  • Adjustable armrests (50/70/80/100mm widths)
  • Cushion heaters - 12v or 24v
  • Fore and aft isolator
  • Adjustable headrest
  • Range of high quality fabric or PVC trims
  • Narrow cushion with 430 or 460mm width
  • Right/Left/Front controls
  • Suspension lockout
  • Document pouch
  • 100mm height and tilt adjustment
  • Vibration performance 7096
  • Seat belt to ISO 6683, SAE J386 and ISO 3776 (anchorage strength 15Kn)
  • Seat belt widths 50mm (2") & 75mm (3")

TECHNICAL INFORMATION

 

  • SIP to ISO 5353
  • Dimensions at mid suspension stroke, mid height adjustment and at sliderail adjustment
  • Inidicative dimnesions

 

ADDITIONAL INFORMATION
This model is just part of the 400 series. Other suspension and static seats are also available.

61/K1

The 61/K1 is a mid back mechanical suspension seat from the New 600 series range.

 

  • Wide platform for improved stability and reduced free play in heavy duty applications

Features

  • Low natural frequency mechanical suspension
  • 160mm vertical suspension stroke
  • Manual adjustment for driver weight,with extended weight range for operators of 50 - 175kg
  • 60mm integral seat height adjustment
  • Backrest angle adjustment
  • Fore and aft adjustment - 160mm
  • Suspension cover
  • 5 position lumbar support
  • 50mm seat cushion length adjustment
  • 7 and a half degree seat tilt adjustment in 3 positions
  • Adjustable headrest
  • 50mm Fore and Aft Isolator

Options

  • Comfort armrests
  • Cushion heaters - 12v or 24v
  • Seat belt to ISO 6683 & SAE J386 (15kN)
  • Meets 22.kN seat belt requirements without tethers
  • Range of high quality fabric or PVC
  • Achieves ISO 7096 seat performance for construction vehicles in categories EM1, EM3,EM4,EM5,EM6 and EM8

  • Constant Seat Index Point (SIP) through the use of a Positioning System Module (PSM)

  • For line drawing click on 'Leaflets'and go to page 9.

11/P4

Features

  • 80mm vertical suspension stroke
  • 70mm integral height adjustment
  • Adjustment for driver weight 50 - 120kg
  • Ride indicator
  • Suspension cover
  • Vibration performance to EEC 78/764 & ISO 7096
  • 15kN seat belt anchorage strength to
  • ISO 6683 & SAE J386
  • Integral one piece foam & PVC trim
  • Rigid steel pan
  • Ventilation and surface drainage grooves
  • Drainage holes in base
  • Contoured surface grooves to channel surface water to drainage holes
  • High backrest

Options

  • Backrest extension
  • 150mm fore & aft adjustment
  • Up-stop

F1

Fixed back medium height upper in PVC trim for use in underground mining vehicles.
Based on the T1 seat upper assembly with Cutaways in the backrest to allow for miners air bottle and torch.

 

Features

  • Fixed backrest. PVC trim. Medium height backrest.

Options

  • Slide rails with 150mm or 160mm adjustment. 11 or 52 suspensions. 

Air 65/K4

The 65/K4 is a high back air suspension seat from the New 600 series range.

 

  • Wide platform for improved stability and reduced free play in heavy duty applications

Features

  • Low natural frequency air suspension
  • 160mm vertical suspension stroke
  • Manual adjustment for driver weight,with extended weight range for operators of 50 - 200kg
  • 60mm integral seat height adjustment
  • Backrest angle adjustment
  • Fore and aft adjustment - 160mm
  • Suspension cover
  • 5 position lumbar support
  • 50mm seat cushion length adjustment
  • 7 and a half degree seat tilt adjustment in 3 positions
  • Adjustable headrest
  • 50mm Fore and Aft Isolator

Options

  • Comfort armrests
  • Cushion heaters - 12v or 24v
  • Seat belt to ISO 6683 & SAE J386 (15kN)
  • Meets 22.kN seat belt requirements without tethers
  • Range of high quality fabric or PVC
  • Achieves ISO 7096 seat performance for construction vehicles in categories EM1, EM3,EM4,EM5,EM6 and EM8

  • Constant Seat Index Point (SIP) through the use of a Positioning System Module (PSM)

  • For line drawing click on 'Leaflets'and go to page 9.

514C

Mechanical suspension seating for the construction and marine sectors

 

Features

  • 2 spring mechanical suspension
  • 100mm (4") vertical suspension stroke
  • 60mm height and tilt adjustment
  • Driver weight adjustment 50 - 120kg (110 - 265lb)
  • Suspension cover
  • Air lumbar
  • Fore and aft adjustment of 180mm (7")
  • Backrest angle adjustment
  • Double locking heavy duty slide rails
  • Vibration performance to ISO 7096
  • Integrated full harness seat belt (4 point)

Options

  • Adjustable armrests (50/70/80/100mm widths)
  • Adjustable headrest
  • Cushion heaters
  • Adjustable damper
  • Double dampers
  • Seat sensor switch
  • Front or side controls available
  • Range of fabrics and PVC

TECHNICAL INFORMATION

 

  • SIP to ISO 5353
  • Dimensions at mid suspension stroke, middle height adjustment and at mid rail adjustment
  • Indicative dimensions

ADDITIONAL INFORMATION
This model is just part of the extensive 500 series range. Other high back, low back and narrower seats are also available.

61/K4

The 61/K4 is a high back mechanical suspension seat from the New 600 series range.

 

  • Wide platform for improved stability and reduced free play in heavy duty applications

 

Features

  • Low natural frequency mechanical suspension
  • 160mm vertical suspension stroke
  • Manual adjustment for driver weight,with extended weight range for operators of 50 - 175kg
  • 60mm integral seat height adjustment
  • Backrest angle adjustment
  • Fore and aft adjustment - 160mm
  • Suspension cover
  • 5 position lumbar support
  • 50mm seat cushion length adjustment
  • 7 and a half degree seat tilt adjustment in 3 positions
  • Adjustable headrest
  • 50mm Fore and Aft Isolator

Options

  • Comfort armrests
  • Cushion heaters - 12v or 24v
  • Seat belt to ISO 6683 & SAE J386 (15kN)
  • Meets 22.kN seat belt requirements without tethers
  • Range of high quality fabric or PVC
  • Achieves ISO 7096 seat performance for construction vehicles in categories EM1, EM3,EM4,EM5,EM6 and EM8

  • Constant Seat Index Point (SIP) through the use of a Positioning System Module (PSM)

P2

Space saving and cost effective one piece seat upper for use in static applications or with XL2, XH2, 11 or 15 suspensions.

 

Features

  • Integral, one piece foam & PVC trim
  • Rigid steel pan
  • Ventilation and surface drainage grooves
  • Drainage holes in base

Options

  • Fabric trim
  • Backrest extension
  • Seatbelt

Air 85/E1

An air seat for the agricultural and construction sectors.

 

Features

  • Air suspension with 12V integral compressor
  • 175mm vertical suspension stroke
  • Height adjustment 70mm
  • 75mm integral height adjustment
  • Driver weight adjustment 50-120kgs(110-265lbs)
  • Ride indicator
  • Suspension cover
  • 5 position lumbar support
  • Backrest angle adjustment

Options

  • Air suspension with 24V integral compressor
  • Fore and aft slide-rail adjustment of 160mm in 10mm steps
  • Horizontal isolator with damper includes fore and aft adjustment of 150mm
  • Seat belt to ISO 6683, SAE J386 and ISO 3776
  • Seat belt widths 50mm(2") and 75mm(3")
  • Adjustable armrest (50/70/80/100mm)
  • Backrest extension
  • Cushion heaters
  • Turntable
  • Swivel 0-10-2- degrees left or right
  • Document pouch
  • Seat sensor switch
  • Variable up-stop
  • Range of fabrics and PVC
  • Double dampers
  • Adjustable damper (3 positions)

This model is just part of the extensive 800 series range. Other high back, low back and narrower seats are also available.

515/525

Features

  • 100mm vertical suspension stroke
  • Manual adjustment for driver, weight from 50 - 120kg. 525 has a weight range of 50 - 150kg.
  • 60mm seat height and tilt adjustment
  • Backrest angle adjustment
  • Fore and aft adjustment - 200mm
  • Suspension cover
  • Vibration performance ISO 7096

Options

  • 5 position lumbar support
  • Adjustable pivoting armrests
  • Cushion heaters - 12v or 24v
  • Seat belt to ISO 6683 & SAE J386 (15kN)
  • Adjustable headrest
  • Tether belt version to meet (22kN)
  • Range of high quality fabric or PVC trims

81/E1

Features

  • Mechanical suspension
  • Contrasting two tone fabric
  • Lumbar support
  • Comfort armrests
  • Back extension
  • 20 degree swivel
  • Variable up-stop
  • Mechanical Lumbar

XH2/P2

Features

  • 90mm vertical suspension stroke
  • Manual adjustment for driver, weight from 50 - 120kg
  • 70mm height adjustment
  • Integral one piece foam and PVC trim
  • Rigid steel pan
  • Ventilation and surface drainage grooves
  • Drainage holes in base
  • Vibration performance to EEC 78/764

Options

  • Fabric trim
  • Backrest extension
  • Seat belt
  • ISO 6683 (15kN) version

Air 15/P4

Features

  • Integral air compressor
  • 80mm vertical suspension stroke
  • 70mm integral height adjustment
  • Adjustment for driver weight 50-120kg
  • Ride indicator
  • Suspension cover
  • P4 upper
  • Vibration performance to EEC 78/764 & ISO 7096
  • 15kN seat belt anchorage strength to
  • ISO 6683, SAE J386 & ISO 3776
  • 150mm fore and aftadjustment

Options

  • Variable up-stop